Carlson Software Knowledge Base

This is in regards to logging static to your BRx7 internal memory using SurvPC 6.08 or higher.

The PDF documents below describe two different applications for logging static.

The link below has instructions for SurvCE/SurvPC 6.17 and SurvPC 7.0 for logging static for OPUS then reprocessing the rover shots to adjusted OPUS coordinates on the 2nd day:

OPUS_Base setup_SurvPC 7.pdf

Click the link below for instructions to download the BIN file from your BRx7 and convert it to RINEX:

Carlson BRx7 - Rinex conversion

The base/rover RTK setup can simultaneously log raw static using Equip / GPS Base / Receiver tab / Advanced / Log Raw data to receiver:

Carlson BRx7_base-rover_Log Raw Static.pdf

Note: For setting a BRx7 over a point and letting it log static without using an RTK rover you can refer to the "GPS Raw Only" pdf document instead:

Carlson BRx7_GPS Raw Only.pdf