You can click the link below for detailed instructions on calibrating the BRx6 or BRx6+ GPS sensors using SurvCE/SurvPC
Version 5.09 or higher:
Carlson_BRx6_Sensor
Calibration using SurvCE.pdf
For a brief 3 page Quick Guide you can click the link below:
Carlson_BRx6_Sensor
Calibration Quick Guide.pdf
To use any IMU feature in SurvCE 5.09 or higher, you will need to tap the Equip tab / tap GPS Rover then tap the
Receiver tab and check the "Use IMU" checkbox and set the position rate to 5hz then tap the Green Check.
The link below has a detailed PDF document that includes screenshots explaining how to use these Sensors in SurvCE 5.09
and higher:
Using
IMU - SurvCE v5 QuickStart.pdf