This procedure is ONLY for the Surveyor2. DO NOT use this for the Allegro 2.
The attached CAB file "Ctrl-Changes.CAB" makes Ctrl-C, Ctrl-V, and Ctrl-X active on the Surveyor 2; causing it to behave
similarly to the previous Surveyor data collector for allowing copy / paste of text.
***Please Note: if you need to completely disable all the "CTRL" hotkeys you can use the attached
"Surveyor2_True-Ctrl-Key.CAB" file instead.
1 Download the Ctrl-Changes.CAB, attached below. Then, save it to a USB/flash drive.
2 Plug the USB/flash into your data collector.
3 From the Windows desktop of the data collector, tap on File Explorer.
4 Use the drop-down, on the upper left, to select Hard Disk.
5 Double-tap the "Ctrl-Changes.CAB" file you downloaded in Step #1 above
6 Follow the prompts to install the CAB to the DEVICE.
7 When the process is complete, reboot the device by hold the power button a few seconds then releasing it when
you see the pop-menu. Tap the "Reset" button to reboot the data collector.