A new "Build" of SurvCADD XML has been made on 1-31-03. After a bake period, it will be posted on our webpage and
released. Here are some of the fixes in this build.
Updates 10-24-02 to 1-31-03
Split Bed By Parameter
Fixed the option to find multiple passing zones.
File: corehole.dll
2D to 3D Polyline By Surface Model
Fixed the option to use a TIN file that was causing a crash.
File: poly3d.dll
Grid File Utilities
Fixed a problem with grid macros when using an inclusion perimeter.
File: makegrid.dll
Buffer Offset
Fixed a conflict with Acad's Offsetgaptype system variable.
File: surv1.fas
Design Pad Template
Fixed the option for Round Exterior Corners for when this option was off.
File: pond.dll
Edit-Process Raw File
Fixed selecting the vertical adjustment method when processing by least-squares.
File: rawedit.dll
MapCheck
Fixed a problem that would cause the program to stop when the output to RW5 option was active.
File: scmc.fas
Cadvantage
Added support for importing and exporting point files.
File: crdutil.dll
Updates 8-29-02 to 10-24-02
Profile Offset Text
Fixed a problem with using a CL file for the alignment.
File: profedit.dll
StrataCalc
Fixed a problem with modeling pinchout and conformance for strata set in Define Strata with the Use Strata In Model
option set as off.
File: makegrid.dll
Switch Bearing Quadrant
Stopped this routine from effecting the delta ang when picking a line/curve table row.
File: scogo1.fas
Twist Point Attributes
Changed this routine to automatically turn Osnaps off while twisting the point attributes to avoid the positions getting
effected by the osnaps.
File: twist_pt.fas
Carlson CRD to TDS CR5
Added the option for whether gaps in the point numbers in the TDS CR5 file should be compressed. Some TDS on-board
instruments only supports the uncompressed format.
File: cogoutil.dll
Design Pad Template
Fixed a problem that could cause a crash if the design surface was a fixed elevation.
File: pond.dll
Triangulate & Contour
Fixed the contour elevation labels to use the proper number of decimal places.
File: tri4.dll
A new “Build” of SurvCADD XML has been made on 8-29-02. Here is a list of improvements and fixes found in this build.
Some minor fixes are not listed here.
Updates 7-18-02 to 8-29-02
C&G Coordinate Conversion To Carlson CRD
Fixed a crash in this routine when running in Acad 2K+.
File: gisutil.dll
Triangulate & Contour
The option to contour a specific elevation was not working.
File: tri4.dll
Wildsoft Conversion
Fixed a problem with converting GIS-16 format Wildsoft raw files.
File: cogoutil.dll
Grid File Utilities
Added support for long grid file names.
File: makegrid.dll
Cut Sheet Report
Fixed the order of a couple columns in the report when using the report coordinates option.
File: crdutil.dll
Drillhole Text Formatter
Improved the alignment of multiple text fields on a single line when center justified.
File: corehole.dll
AutoCad Design Center
Fixed a conflict between AutoCad Design Center and SurvCADD that could cause a crash when dragging blocks.
File: scadutil.dll
Updates 6-24-02 to 7-18-02
Label Arc
The position of the label did not always follow the arc. Also there was an extra “ in bearing labels.
File: labarc.fas
Field-To-Finish
Codes can now contain the “_” character.
File: finish.dll
Edit-Process Raw File
For the process option to calculate elevations for sideshots, the program figures which shots are traverses by analyzing
setups in addition to matching the record type.
File: rawedit.dll
Mining: Custom Date and Amount Table
Fixed problem of table file size growing out of control.
File: mineutil.dll