If you use a Carlson Surveyor+ data collector you need to be running SurvCE Version 2.08 or higher to use Bluetooth
Connections.
After installing the update open SurvCE:
1) tap the Equip tab
2) tap Total Station, GPS Base or GPS Rover
3) tap the Comms tab
4) Select Bluetooth for the Type
5) set the “Device” to “Windows Mobile”
6) At this point tap the Configure button off to the right and use the “Find Receiver” button to add
your instrument to the list
7) If the instrument requires a Passkey you MUST Use the “Set Receiver Pin” button for the
connection to work properly. {For Topcon GPT-3000 the passkey would be 1111}
Please update your Carlson Surveyor+ or Mini to SurvCE Version 2.08 using the attached PDF document below
jg