This is in regards to using SurvCE on a data collector with the Survey tab / Leveling routine to create a *.TLV file in
the field then processing it in Carlson Survey in the Office using Survnet.
Attached at the bottom of this page is a Sample Survnet Project, Text Report and *.TLV level file from SurvCE.
This support is in Carlson Survey 2009 or in Survnet 5.0 and higher:
1) Click Survey / then click Survnet
2) Click Settings / click Project Settings
3) click the Input Files tab
4) Check the box for "Level Raw File" / select "Carlson Trig Level File (tlv)" for format
5) Click Select and browse to the *.tlv file on your Hard Drive / click Open
6) Uncheck the box for "Raw Data File" / click Apply
7) Click the "Standard Errors" tab at the top middle and fill in any "Differential Leveling Standard Errors" that apply
to your Level Loop {i.e. - Avg. Distance to Backsight, Reading Errors, etc.}
8) Click Process / click Network Adjust = it does a vertical adjustment of the SurvCE *.tlv file with a Full report in a
*.rpt file and coordinates created in a *.nez file
jg