This article is to address Quicklock issues if you have already updated to the Latest version of SurvCE and gone through
normal troubleshooting procedures.
Below is the method used to check the firmware version in the Topcon robots. This information frequently changes so it
is a good idea to consult your Topcon dealer for the latest firmware version information. If you are having Quicklock
issues in SurvCE while using the Robot with a Topcon RC unit, this is a good thing to check as the older versions of
Topcon Firmware have known Quicklock issues.
Check Firmware Topcon 820-8200/800-8000
--------------------------------------
Check the Instrument Firmware:
1. From the main Screen on the instrument press 7 followed by Enter on the instrument keypad. You will need to
continue pressing Enter every few seconds in order to keep the information on the screen.
2. Current Version on 12-21-2005
Bios: 4.1.0
ABS: 1.20
EDM: 1
Std: 4.11E
Track: 1.10
Check the Instrument Handle Firmware (If using with RC2):
1. From the main screen on the instrument enter the following number on the instrument keypad: 0464145.
2. Press Enter
3. Choose Option 4
4. Current Version on 12-21-2005
Version: 2.1
Check Firmware Topcon 900-9000
--------------------------------------
Check the Instrument Firmware:
1. From the Standard Measurement Screen on the instrument press 7 followed by Enter on the instrument keypad. You
will need to continue pressing Enter every few seconds in order to keep the information on the screen.
2. This version is current as of 10-15-2007.
Bios: 1.41
Keyboard: 1.10
Boot Loader: 1.11
ABS: 1.410
ABS Loader: 1.010
EDM: 1.100
Auto Tracking: 1.010
Std Measurment: 1.40
Check the Instrument Handle Firmware (If using with RC3):
1. From the standard measurment screen on the instrument enter the following number on the instrument keypad:
0464143.
2. This version is current as of 10-15-2007.
3. Choose Option 4
4. Choose Version top option
Version: 1.12