Title: Adding co-ords to drawing without a CRD | |
Topic ID: 1375 | |
Category: Australia-Pacific Support / Tips & Tricks for Carlson Software | |
Modified: 2023-07-19 |
If you wish to add co-ords to a draw without a CRD file then follow these steps. 1) Create the drawing 2) Open up the Annotate tab and select Label Coordinates/Elev 3) Decide how and what to present, these setting can be Saved and Loaded 4) Select the line or point for the Coordinates to be added. 5) Repeat if necessary. |
|
|
|
|
|
|