| Title: Carlson BRx7 - Slant measure mark | |
| Topic ID: 1199 | |
| Category: SurvCE|PC / SurvCE / Quick Start Guides / Carlson Instruments | |
| Modified: 2024-03-21 |
This is in regards to measuring to the slant measure mark on the BRx7 when you have the Equip / GPS Base or GPS Rover / Receiver tab set for "Slant" as the antenna height method. The slant measure mark on the BRx7 is the bottom of the blue cap as shown.
***You can also measure 0.18 feet {54.7 mm} up from the bottom of the receiver to locate this same spot shown in the diagrams below.
|
||||
|
||||
|
||||
|