Knowledge Base

Category: CR2/CR5 Total Stations
Topic ID: 1137
Title: Show QuickView At Startup (On-board SurvCE)
Created: 0000-00-00Last modified: 0000-00-00
In order to have your CR2 show "basic angles and distances", when the program first starts; you must turn on a setting within the On-board SurvCE program.

1- Launch SurvCE.
2- Continue last job.
3- Click on the Equipment tab.
4- Select the Configure button.
5- Turn on "Show QuickView at startup", under the General tab.
6- Tap the Green check mark to save the setting.
7- Go back to the File tab, and select Exit.

When you relaunch SurvCE, you will be shown the standard angles of a conventional instrument.