Knowledge Base

Category: SurvCE|PC / SurvCE / SurvCE 2.50
Topic ID: 731
Title: GPS Grid to Ground options
Created: 2012-02-29Last modified: 2024-03-19

This is in regards to using SurvCE Version 6.02 or higher to scale your GPS equipment to Ground Distances.

Note: It is most common to use a Multipoint Method of "Plane Similarity" and to add four to six control points around the outside of the project area in the Points tab. This automatically calculates your grid to ground scale factor for you in which case NONE of the information in this article applies.

SurvCE 6.02 and later

  1. Applying a Grid to Ground Scale Factor without a Rover Localization: Basic Grid to Ground conversion
  2. Using a "2-point Rotate Only" Localization scaled to Ground: 2-point Grid to Ground
  3. Using a "1-point Localization" with assumed Local Coordinates scaled to Ground (e.g. - Northing of 5,000 + Easting 10,000 + Elevation 900): 1-point Grid to Ground

SurvCE 3.03 and later

  1. Applying a Grid to Ground Scale Factor without a Rover Localization: Basic Grid to Ground conversion
  2. Using a "2-point Rotate Only" Localization scaled to Ground: 2-point Grid to Ground
  3. Using a "1-point Localization" with assumed Local Coordinates scaled to Ground (e.g. - Northing of 5,000 + Easting 10,000 + Elevation 900): 1-point Grid to Ground

SurvCE 2.50 and later

  1. Applying a Grid to Ground Scale Factor without a Rover Localization: Basic Grid to Ground conversion
  2. Using a "2-point Rotate Only" Localization scaled to Ground: 2-point Grid to Ground
  3. Using a "1-point Localization" with assumed Local Coordinates scaled to Ground (e.g. - Northing of 5,000 + Easting 10,000 + Elevation 900): 1-point Grid to Ground
Links:
Attachments:
SurvCE250_Grid2Grnd2pt.pdf
SurvCE250_Grd2Grnd.pdf
SurvCE250_Grd2Grnd_1pt.pdf
SurvCE303_Grid2Grnd.pdf
SurvCE303_Grid2Grnd_1pt.pdf
SurvCE303_Grid2Grnd_2pt.pdf
SurvCE602_Grid2Grnd.pdf
SurvCE602_Grid2Grnd_1pt.pdf
SurvCE602_Grid2Grnd_2pt.pdf
Keywords: